Raritan marine head with Y valve and Vetus flexible holding tank
SS sink with brass water pump
12 volt electrical system
Dual batteries (one needs replacement)
120 volt system with shore power plug and cable
Origo 12v/120v fridge
Rule 1000 bilge pump
Sloop or yawl rig with Harken roller furling
Mast tabernacle and mast raising system
Bow and stern pulpits
Anchor roller
Two anchors with chain and nylon rodes
Six new Taylor fenders
New dock lines
Swim ladder
Sunbrella bimini and cockpit cushions
Raymarine ST-60 Digital depth sounder
Lowrance Globalmap 4000M plotter/gps
Autohelm tillerpilot
Horizon VHF
Two compasses
18HP Yanmar diesel (372 hrs.)
New PSS propellor shaft dripless seal (not yet installed)
Dual engine controls
Tiller and wheel steering
All lines run aft for single-handed sailing
New FX main sail and jib, white Dacron
Johnson Sails tanbark 135% Genoa and mizzen sail
Harken roller furling
Galvanized dual axle trailer included (New tires, wheel bearings and
lights)
Will need dripless shaft seal installed (Yard estimate - $400 or less).
New boomkin built if you want to use mizzen sail. Interior woodwork needs
sanding and varnishing. All deck hardware should be rebedded although none are
leaking at present. Exterior teak needs cleaning and sealing.
Good morning David,
I sold the boat on Friday, the third of April, for 13,500. I'm happy with the sale in spite of the low price because it looks as though Phil will complete the restoration that I started. So the boat will be in good hands and well taken care of. Thank you for helping me to make this sale possible and for providing a venue for those of us who love sailing and sailboats. I have a new/old boat, a Com-Pac Sun Cat. I've never sailed a catboat before so this will be a new learning experience. My family comes from Cape Cod and back in the 1800's we used catboats as workboats. They were the equivalent for us of a seagoing pickup truck.
Nick
White Springs, Florida
