This is a 1980 30' custom built boat by Shea Marine for the 1/2 ton racing circuit that existed in the US in the 1970's and 1980's. This boat is one of three off the mold before the design was adjusted. It is a West Epoxy molded hull with Plywood Decks.
The wood is in good condition and wood will pass a survey.
The plywood decking and its supports have been updated over the years.
In the four years that I have owned the boat
New transom to better support the outboard
Replaced the hatch molding
New wood to the laminated bow piece.
The boat is ready to race. (PHRF rating=144)
It has a 2006 Doyle Main Sail
8 older sails, some that have been hardly used.
2 spinnakers 3/4oz, and 1/2 oz
4 genoas 105%, 3- 150%
1-Storm Jib
1-Staysail
A new main halyard, Spinnaker halyard and main sheet
a Harken furler system ($2000)
Boom Kicker
Spinlock sheet clutches
5-- Lewmar 2speed winches
This boat is easily maintained, good for short handed sailing and can provide a lot of sailing fun for very little money.
Contact me if you would like further pictures or information.