Settees in main cabin pull out for bunks to port and starbord
Galley
Propane 2 burner stove and oven
Ice box
Electronics
Raymarine ST40 Depth Sounder
Icom VHF
West Marine Inverter
Sails
2 Mains (1 Battoned)
2 Genoas
1 Staysail
1 Yankee
Deck
666 Sampson 2 speed anchor windlass
Two exterior Anchor lockers
Open cockpit, easy to manuever in/on
Self draining exterior propane locker
Anchors
65 lb Luke fishermans
45 lb C36 lb fortress
35 lb Bruce
100' 5/16 high test chain with 400 feet of 5/8 nylon
50' 5/16 High test chain with 350 feet of 5/8 nylon
Additional
Miller MIG Welder
New rigging in 2005
Head has a new toilet
New Upolhostery
Spares and extras for engine and all pumps.
Walker Bay rowing dingy
9ft Zodiac Inflatable with 15 hp Johnson
Plenty of storage space and nice open cabin, very roomy for a 32 ft vessel
Tahinu is a traditional steel cutter that shares the hull design of
the famous Tahiti Ketch. However, the Tahitiana is two feet longer
with a finer entry. Tahinu was professioally built in the Botters
Boatyard in Canada. She is a triple chine hull design, but the 1st and
3rd chines have been rounded to leave a seamless appearance above the
waterline. This boat has undergone a complete refit in 09. The hull
was sounded and all steel that had thined was replated. The entire
hull was cleaned and repainted with Ameron epoxy paint. The boat was
also repowered with a new Yanmar diesel that has under 300 hours on
it. This is one of the few steel boats that has no rust, and has a
paint system that will keep it that way with minimal maintance. So
much work has been done on this boat it is hard to name off the list.
This is a simple sturdy little sailing vessel that has been tested and
will safely take a couple or a single hander anywhere. She is a true
bluewater cruiser with a motion much more comfortable then many boats
much larger.
